Name: Rotary Table, 6" - Precision
SKU: 1787
Availability: InStock

Description

6 inch horizontal / vertical rotary table
#2 Morse Taper center hole
3 T-slots with 0.43″ channels
Height 3.1″, vertical height 7.8″
Gear ratio 90:1, 10 second vernier reading

This 6″ horizontal / vertical rotary table is for indexing, circular cutting, angle setting, boring, and spot facing operations. The cast iron table is precision machined in Taiwan and has a #2 Morse taper center hole. This 6″ rotary table is graduated with a 360° scale. A micro collar graduated to one minute with a ten second accuracy vernier scale is provided. This horizontal/vertical rotary table has lock down clamps and the crank can be disengaged.

The worm gear and center hole are hardened and ground.

The 6″ rotary table is 3.1″ high when horizontal, and 7.8″ when vertical. The centerline is 3.9″ above the table when in the vertical position.

The worm ratio is 90 to 1 and one rotation of the handle equals 4 degrees on the collar.

There are three T-slots and each slot is 0.43″ in width.

Flatness of clamping surface: 0.0006″

Parallelism of clamping surface to base: 0.0008″

Squareness of clamping surface to angle face: 0.0004″

Squareness of clamping surface to center slot: 0.0008″

Concentricity of center bore: 0.0008″

Dividing plates and a tailstock are available for this rotary table.

Specifications

Ratio	90:1
Table Diameter	5.91″ (150.0 mm)
Height (Mounted Horizontal)	3.1″ (80 mm)
Center Hole Taper	2 Morse Taper
Center Height (Mounted Vertically)	3.90″ (99.0 mm)
T-Slot Width	0.43″ (11.0 mm)
Minimum Vernier Reading	10″
Flatness of Table Surface (Concave)	0.0006″ (0.015 mm)
Parallelism of Table Surface to Base	0.0008″ (0.020 mm)
Squareness of Table Surface to Base	0.0004″ (0.010 mm)
Runout of Table Surface	0.0008″ (0.020 mm)
Runout of Center Taper	0.0006″ (0.015 mm)
Squareness of Table Surface to Angle Face Slot	0.0006″ (0.015 mm)
Center Hole Parallel with the Angle Face	0.0006″ (0.015 mm)
Maximum Spacing Error	80″