Description
- 3/8-16×5, Hex Head Cap Screw
- Mini lathe drawbar
- Hardened grade 8
- Fit SIEG C2 and SC2 class of mini lathes
Cap screw drawbar, 3/8-16 x 5 , hex head, hardened grade 8
This is the 3/8″-16 drawbar for the 7×10 and 7×12 mini lathe with the 3 Morse Taper spindle.
Made from Grade 8 steel, these screws can be used in high-stress applications, such as valves, pumps, motors, and automotive suspension systems. They are at least 25% stronger than medium-strength steel screws. Grade 8 steel hex head screws are marked with six radial lines. Length is measured from under the head.
Zinc-flake-coated steel screws are about five times as corrosion resistant as zinc yellow-chromate plated screws and have good resistance to salt water and acids. Also known as ultra coat and armor coat. To maintain corrosion resistance, use these screws with zinc-flake-coated nuts and washers.
See Specifications Tab for more information on this product.
See the Compatibility tab for machines that work with this product.
| Length | 5″ (127 mm) |
| System of Measurement | Inch |
| Head Type | Hex |
| Drive Style | External Hex |
| Thread Direction | Right Hand |
| Thread Size | 3/8″-16 |
| Screw Size Decimal Equivalent | 0.375″ |
| Thread Type | UNC |
| Thread Fit | Class 2A |
| Threading | Partially Threaded |
| Min. Thread Length | 1″ (25 mm) |
| Thread Spacing | Coarse |
| Head Width | 9/16″ |
| Height | 15/64″ |
| Fastener Strength | Grade 8 |
| Material | Steel |
| Finish | Zinc-Flake Coated |
| Tensile Strength | 150 |
| Hardness | Rc 33 |
Reviews
There are no reviews yet.